Editing Step 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Begin reassembling the camera with the orange strip with the yellow edge.

Align the orange strip on the back half of the camera with its slot on the front part of the camera.

Use the metal tweezers to insert the orange ribbon into the slot. Push the ribbon in as far as it can go into the slot.

Use the metal tweezers to push the black tabs at each side of the slot toward the center. The tabs will hold the orange ribbon in place.

Your contributions are licensed under the open source Creative Commons license.