Skip to main content
Help
Editing Step 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 17 guides that include this step.

Step Type:

Drag to rearrange

Slide the pick along the edge of the display, towards the headphone jack.

If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat.

Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.

A good rule of thumb is to never insert the opening pick more than a quarter inch (6 mm) into the iPad.

Your contributions are licensed under the open source Creative Commons license.