Skip to main content

Fix Your Stuff

Right to Repair

Store

Help
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Remove the Home Button bracket and peel up the tape connected to it.

During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it

Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.

Secure the bracket with hot-melt glue, superglue, or high-strength double-sided tape. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed.

Your contributions are licensed under the open source Creative Commons license.