Skip to main content
Help
Editing Step 10 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Insert a plastic opening tool between the metal LCD frame and the front bezel.

Be sure you are prying between the metal LCD frame and the front bezel, not between the metal LCD frame and the LCD.

It may be necessary to reheat this area until the adhesive yields enough to insert the edge of a tool.

Use the flat end of a metal spudger to gently pry up the adhesive securing the metal LCD frame to the front bezel, taking special care not to scratch the LCD panel.

Your contributions are licensed under the open source Creative Commons license.