Skip to main content
Help
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

The following connector has an especially deep socket. Use care when disconnecting it.

Carefully peel the I/O board cable from the top of the fan.

While gently pulling the I/O board cable upward near its connection to the logic board, use the tip of a spudger to pry upward on alternating sides of the connector to help "walk" it out of its socket.

Remove the I/O board cable.

Your contributions are licensed under the open source Creative Commons license.