Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help
Editing Step 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

Disconnect the display cable by gently pulling it straight out of its connector.

Immediately close the retaining flap.

The flap must remain closed when the cable is reinserted during reassembly. Carefully line up the cable with the gold contacts facing down, and gently slide it into the connector. Take care not to crimp or damage the cable. When fully inserted, the indentations on the sides should not be visible.

Your contributions are licensed under the open source Creative Commons license.