Skip to main content
Help
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Slide the pick down the edge of the display to separate the adhesive underneath.

Stop cutting when you get to the daughterboard to avoid the delicate capacitive button under the display.

If cutting becomes difficult at any point, reheat and reapply the iOpener.

After cutting the adhesive, leave the pick in the side of the display to prevent the display from re-adhering to the frame.

Your contributions are licensed under the open source Creative Commons license.