Skip to main content
Help
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 25 guides that include this step.

Step Type:

Drag to rearrange

Once the rear glass is hot to the touch, apply a suction cup near the bottom edge of the glass.

Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap.

Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.

Your contributions are licensed under the open source Creative Commons license.