Skip to main content
Help
Editing Step 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

Lift the camera-side end of the motherboard to separate it from the display frame.

You may need to move some of the ribbon cables out of the way while you lift the motherboard. If the board is hard to lift, check that it is fully disconnected and not caught on any ribbon cables.

Do not fully remove the motherboard yet—it is still attached to the daughterboard via a ribbon cable on the underside of the motherboard.

Your contributions are licensed under the open source Creative Commons license.