Skip to main content
Editing Step 22 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 48 guides that include this step.

Step Type:

Drag to rearrange

Insert the tip of one last pick next to the previous step's pick, and slide it beneath the home button.

Stop about an inch from the right-hand side to avoid cutting the digitizer cable.

Insert the pick slightly deeper and work it back toward the home button.

Again, be sure to only slide the pick toward the center of the iPad when it is fully inserted; otherwise you may damage the antenna beneath the glass.

Your contributions are licensed under the open source Creative Commons license.