Skip to main content
Help
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 9 guides that include this step.

Step Type:

Drag to rearrange

Lift the home bar up as high as it will go, but not so high that the wires disconnect.

Try to bend the small tab under the silver rim as little as possible it the following steps. The more you bend, the more likely it will snap.

Twist the home bar counter clockwise while carefully lifting it further. The left edge has to lift over the black plastic frame to allow it to rotate.

The home bar should now lift out of the PSP 300xc.

Your contributions are licensed under the open source Creative Commons license.