Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Editing Step 1 —

Step Type:

Drag to rearrange

First off unplug the monitor from power as well as from the back of the computer. Find a flat surface and lay the monitor on its face so that you can get to the back of it. The screws that hold the monitor stand on are covered by a small plastic bezel ( shown in photo with the red arrow). This is held on with just pressure and if you squeeze at the points mark with a blue circle it should pop free and the bezel can be removed.

Your contributions are licensed under the open source Creative Commons license.