Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Editing Step 9 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Use a pair of tweezers to gently lift the vibrator out of its crevace. It is held in only with friction, no adhesive or screws. Be careful when lifting to avoid damaging the wires connecting it to the motherboard.

Use a plastic opening tool or a spudger to gently pry the motherboard out of the case. lift first from the top (near the camera).

The motherboard is secured with adhesive at the bottom (on the speaker assembly) so you may need to use an iOpener or heat gun to loosen the adhesive. Refer to the iOpener guide for info on this.

Your contributions are licensed under the open source Creative Commons license.