Skip to main content

Fix Your Stuff

Right to Repair

Store

Help
Editing Step 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Use a pair of tweezers to lift the vibrator out of its crevace.

Be gentle to avoid damaging the wires connecting it to the motherboard.

Use an iOpener or heat gun to loosen the adhesive at the bottom of the motherboard.

Refer to the iOpener Instructions for further info.

Use a plastic opening tool or a spudger to gently pry the motherboard out of the case along the edges.

Then, gently lift the motherboard beginning from the top corner first (near the camera).

Your contributions are licensed under the open source Creative Commons license.