Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help
Editing Step 7 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Remove the dual LED flash cover. This is held on with a small amount of adhesive. Be careful here: the flash cover may be glued to the antenna cable(s) below. Apply a small amount of heat here to soften the adhesive before removal.

Use a pair of tweezers to disconnect the two antenna cables near the camera. Note that some models of this phone will have only one antenna cable at this location.

Use a pair of tweezers to disconnect the antenna cable near the bottom of the phone.

Your contributions are licensed under the open source Creative Commons license.