Skip to main content
Help
Editing Step 10 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 16 guides that include this step.

Step Type:

Drag to rearrange

Use a firm plastic edge to scrape the thermal material off the processor.

When replacing the logic board, make sure all cables are routed around and above - not under - it, and to connect the two cables that do go beneath before pushing the board into place.

Place the logic board back in the computer, trying not to move it around once the processor has come into contact with the newly-applied thermal paste.

Your contributions are licensed under the open source Creative Commons license.