Skip to main content
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Use an iOpener or a heat gun to loosen up the adhesive securing the motherboard to the display assembly.

Use a plastic opening tool to gently pry the motherboard free of the display assembly.

At this point, the bottom speaker is still attached to the motherboard. If you are only replacing the motherboard, refer to the bottom speaker guide to swap your existing speaker to the new motherboard.

Your contributions are licensed under the open source Creative Commons license.