Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Hold back the strips of EMI tape along the lower edge of the LCD as you remove the two T5 Torx screws securing the retaining clips shown.

Stick the tape down against the new clips and reinstall the two T5 Torx screws.

If you are replacing your panel with a new one, be aware that the new panel may have a protective film on the outside and/or inside of the frame. This needs to be removed.

Your contributions are licensed under the open source Creative Commons license.