Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

If you are reusing the LCD, it is not necessary to peel the ambient light sensor off the back face of the LCD.

Use the edge of a plastic opening tool to carefully pry the ambient light sensor board off the adhesive securing it to the display frame.

Once you've gained enough clearance, peel the ambient light sensor off the LCD.

Be careful not to crease the ambient light sensor below its top section, as the portion with adhesive applied may break off.

If necessary, attach the plastic view window to your new ambient light sensor before installation.

Your contributions are licensed under the open source Creative Commons license.