Skip to main content
Help
Editing Step 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Gently remove the flash component from the rest of the camera.

Use a spudger or a flathead screwdriver and carefully pry off the plastic piece on top of the flash unit.

The flash unit can now be removed and replaced.

Be careful not to touch the capacitor attached to the flash unit as it may still be holding a charge!

Your contributions are licensed under the open source Creative Commons license.