Skip to main content
Help
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Step Type:

Drag to rearrange

Carefully insert a small flathead screwdriver in the seam between the metal casing and white plastic top. Use the screwdriver to pry up the white plastic top bezel. Be careful not to damage the soft plastic with your screwdriver.

The top bezel is held on with an adhesive, so it may be necessary to pry up in several different locations to free the part.

To make this job easier, heat up the adhesive with a hairdryer on low heat for a few seconds.

Your contributions are licensed under the open source Creative Commons license.