Skip to main content
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

First, use plastic coated tweezers to pull up the black release tab.

Pull on the black connector with tweezers as close as possible to the white connector base, making sure not to pull on the connector base.

It is important to be careful not to damage the black connector tape or the white base.

Next, use the tweezers to peel off the tape holding down the connector to the front camera.

The front camera can now be removed from its socket.

Your contributions are licensed under the open source Creative Commons license.