Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Slide the grey ribbon wire connector clip away from the ribbon wire port on the motherboard using the pointed tip of a spudger. This process will unclip the wire from the motherboard to release connection.

You do not need to fully disconnect the ribbon wire clip from the ribbon wire port: the clip will stay attached in a loose fit.

Remove the ribbon wire from the ribbon wire port on the motherboard.

Your contributions are licensed under the open source Creative Commons license.