Skip to main content
Help
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Remove any tape on the flash component on the left.

Using tweezers, disconnect the plastic strip from its connector on the motherboard by lifting the plastic black flap on the connector and pulling the ribbon.

Using a #000 Philips head screwdriver remove four screws (4.1mm) on the metal plate.

Gently lift the flash components out of the camera casing.

Your contributions are licensed under the open source Creative Commons license.