Skip to main content
Editing Step 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Using a #000 Philips head screwdriver remove the two screws (4.1mm) on the right side of the camera.

Remove two screws (4.1mm) on the bottom of the camera using a #000 head Phillips screwdriver.

Remove the single screw (3.2mm) on the front of the camera using a #000 Phillips head.

Your contributions are licensed under the open source Creative Commons license.