Skip to main content
Help
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Locate and unscrew the four 3 mm screws using the Phillips #00 screwdriver.

Unscrew the one T5 Torx screw using the special T5 Torx screwdriver head.

The 2 mm T5 Torx screw is located on the motherboard near the antenna clip.

If you aren't equipped with the T5 Torx screwdriver, you could try using your fingers, although it will be very difficult to remove it.

Your contributions are licensed under the open source Creative Commons license.