Skip to main content

Fix Your Stuff

Right to Repair

Store

Help
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Locate the two ribbons connected to the camera and the LCD screen. (One is red and small and the other is wide and orange)

Remove the top left red ribbon by gripping the connector on the camera and sliding it straight out.

Remove the side orange ribbon by gripping the connector on the camera and sliding it straight out.

Note: It may be helpful to use tweezers when removing the connectors. (Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later)

Note: When reassembling, use tweezers to reconnect the small red connector on the top left of the screen.

Your contributions are licensed under the open source Creative Commons license.