Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Using a hair dryer, slowly heat the edges of the WorkPad.

Spend at least one minute heating each side of the device. This will melt the glue holding the case together, and allow it to be removed.

Be sure not to touch the device directly after heating as it will be extremely hot. Use a towel or oven mitt to grab it.

Your contributions are licensed under the open source Creative Commons license.