Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

If you have not already done so, disconnect the two bottom-LCD ribbon cables from the main board by prying up the black latches and pulling the cable out to the side.

The ribbon cable (marked in blue) for the touch screen is particularly thin and fragile; be careful to avoid bending it more than necessary.

Flip up the latch and remove the touch screen cable.

Flip up the latch and remove the top-screen ribbon cable.

Pry up on the orange cable to disconnect it from the main board, much like the antenna cable on the Wi-Fi module.

Do not pull on the orange cable that connects to the bottom of the motherboard.

Your contributions are licensed under the open source Creative Commons license.