Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Hold the camera at an angle to locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.

Use the flat end of the spudger to flip up the tab of the blue ZIF connector. Slide the ribbon cable out.

Once the ribbon is removed, the LCD screen can be rotated away from its initial position to reveal more screws underneath.

Do not pull the LCD screen out or rotate past 180 degrees away from its initial position, or else you will damage the remaining ribbon that holds the LCD sceen in place.

Your contributions are licensed under the open source Creative Commons license.