Skip to main content
Help
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 19 guides that include this step.

Step Type:

Drag to rearrange

Carefully lift the lower casing from its bottom edge.

The lower case is still attached to the motherboard by the volume and SD board cable highlighted in red. Do not try to completely remove the lower case of the DSi yet.

Pry the volume and SD board cable up from its socket on the motherboard using a spudger.

Once the cable is completely removed, then you may take off the entire outer casing.

Your contributions are licensed under the open source Creative Commons license.