Skip to main content
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Disconnect the speaker cable from the motherboard by gently pulling it straight up to disengage it from the port.

Remove the four 4mm Philips #0 screws that secure the motherboard to the case.

The screw in the corner where the RAM is located is covered by a small piece of Mylar tape, peel this tape back to reveal the screw. The tweezers can be helpful for this.

Your contributions are licensed under the open source Creative Commons license.