Skip to main content
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 12 guides that include this step.

Step Type:

Drag to rearrange

Use the point of a spudger to gently lift the battery connector up off its socket on the logic board.

Be very careful to only pry up the battery connector, not the socket itself. If you pry up on the logic board socket, you may break the connector entirely.

Make sure to pry up the battery connector before attempting any other repairs inside the device.

Your contributions are licensed under the open source Creative Commons license.