Skip to main content
Editing Step 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Lift the left side of the front bezel away from the upper case.

Do not lift too far, or else the hinge pin will break. Only lift enough to clear the LED compartment, about 1".

Pull the front bezel to the left, separating the front bezel from the upper case.

Do not attempt to fully separate the two halves yet. There are still ribbon cables running through the upper case.

Your contributions are licensed under the open source Creative Commons license.