Skip to main content
Editing Step 7 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

In the following steps, you will be using a spudger to remove the hinge pin from the left side of the DSi XL.

Place the tip of a spudger in the LED diffuser compartment, on the face of the clutch hinge.

Push the clutch hinge to the left.

Some force will be required. You will hear an audible "pop" when the clutch has cleared the lower case. It will move about 0.25".

Your contributions are licensed under the open source Creative Commons license.