Skip to main content

Fix Your Stuff

Right to Repair

Store

Help
Editing Step 7 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

With a set of tweezers, flip the front end of the button bracket up to allow access to the rest of the button ribbon cable.

Do not remove the bracket entirely—it is still attached to the ribbon cable. Be very careful while moving the bracket, or you may tear the fine offshoots of the ribbon cable.

During reassembly, be sure the lock/mute switch fits properly into the notch in the lock/mute button.

Your contributions are licensed under the open source Creative Commons license.