Help
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

The capacitor can store electricity even when the camera is off! Do not touch it until you have safely discharged it.

Connect the two capacitor wires briefly with a pair of metal tweezers to discharge it. You may see a small spark.

Remove 8 screws.

2 screws in the front (2X 4.31mm).

2 screws on the bottom (2X3.30MM).

4 screws in the back (3x 3.33mm, and 1x 4.34mm).

Your contributions are licensed under the open source Creative Commons license.