Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

Step Type:

Drag to rearrange

Before disconnecting the camera cable, a small plastic retainer stuck to the logic board must first be moved out of the way. In late-2011 models you can skip this step because there is not a plastic retainer on the camera cable connector.

Use the tip of a spudger to push the small plastic cable retainer away from the camera cable socket for enough clearance to remove the camera cable.

Your contributions are licensed under the open source Creative Commons license.