Skip to main content
Help
Editing Step 13 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

Step Type:

Drag to rearrange

Grab the upper case with your right hand and rotate it slightly toward the top of the display so the upper display bracket clears the edge of the upper case.

Rotate the display slightly away from the upper case.

Lift the display up and away from the upper case, minding any brackets or cables that may get caught.

During reassembly, fit the display into place and install the display bracket Torx screws, then close the lid and lay the laptop upside-down to check the alignment of the screen to the body. If necessary, loosen the screws and realign the display before tightening.

Your contributions are licensed under the open source Creative Commons license.