Skip to main content
Editing Step 17 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Step Type:

Drag to rearrange

Handle the logic board assembly by its edges only.

Lift the logic board assembly from the side nearest the optical drive and lift it away from the upper case.

Note that you'll be removing the logic board and DC-in board together.

Carefully pull the ports and DC-In board away from the side of the upper case and remove the logic board assembly, minding any cables that may get caught.

Your contributions are licensed under the open source Creative Commons license.