Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Lift the display up from its lower edge and rotate it toward the top of the Touch.

The next few steps require removal of components under where the display normally sits. Be sure to hold the display to avoid putting tension on the delicate display ribbon cable.

Remove the seven Phillips screws securing the metal display tray to the rear panel. They may be very tight; watch carefully to make sure you don't strip them.

The two darker screws belong in the two holes in the tray nearest the bottom edge of the Touch.

Your contributions are licensed under the open source Creative Commons license.