Skip to main content
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Pry open the black casing to access the screw that is holding down the battery holder.

Remove the one 1.4 mm screw that is holding down the battery holder located under black casing.

Lift the black inner casing and the battery holder out of the device.

The battery holder and the black inner casing are connected by a thin strip of copper. There may be glue holding the black inner casing in place.

Your contributions are licensed under the open source Creative Commons license.