Skip to main content
Help
Editing Step 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Use a metal spudger to pry up the left edge of the upper grey front plate.

Place the spudger between the inside white plastic edge and the grey plate. Do not pry between the two white plastic frames.

Don’t pry against the glass. Pry against only the left side as there is a delicate antenna under the plate.

Use the narrow plastic pry tool to carefully separate the black ribbon antenna from the grey plate.

Your contributions are licensed under the open source Creative Commons license.