Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Editing Step 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Remove the clipped ZIF data connector coming from underneath the motherboard.

Lift up the black plastic clip with a spudger.

Pull the connector out gently using tweezers.

Be careful to ensure that the black plastic clip has been lifted away from the connector ribbon before pulling on the connector. The clip should be loose and easy to wiggle. Removing the connector before it is unclipped can cause damage.

Your contributions are licensed under the open source Creative Commons license.