Skip to main content
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Use a heat gun to soften the adhesive underneath the camera/microphone cover.

Pry the camera/microphone cover off the case with a metal spudger and remove it.

It is extremely difficult, if not impossible, to avoid damaging the iPod case near the camera. While this will not affect the iPod's functionality, it will hurt its cosmetic appearance.

Your contributions are licensed under the open source Creative Commons license.