Help
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 36 guides that include this step.

Step Type:

Drag to rearrange

Remove the following 3 screws from the rear wall of the battery compartment:

Two 3 mm Phillips #00. (A1181 has three 3 mm screws and one 4 mm.)

One 4 mm Phillips #00 on the right side.

When reinstalling these screws, press gently on the lower case to line up the screw holes.

These screws easily strip, so be careful while taking these particular screws out.

Your contributions are licensed under the open source Creative Commons license.