Skip to main content

Step Type:

Drag to rearrange

Start by unscrewing the battery compartment cap on the LHS of the keyboard and removing the two AA cells.

Next, turn the keyboard upside-down and locate the grey plastic cover. Apply firm inward squeezing pressure to the cover and lift it off away from the keyboard.

The cover is held in place by six clips, so you may need to use a plastic prying tool to coax it off.

You will also need to remove the keys. Every single one. And their clips. Go slow, and don't pull at the keys. Use your prying tool to unsnap them from their clips.

Your contributions are licensed under the open source Creative Commons license.