Skip to main content
Help
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Use a spudger tool to release the black clips on the two connectors holding the flat, yellow cable in place.

Use the tweezers to pull the flat, yellow cable out of its connectors.

Use the tweezers to disconnect the battery connector from the circuit board.

Using the spudger tool again, pry up and release the connectors at the ends of the flat, orange cable.

Remove the flat, orange cable.

Your contributions are licensed under the open source Creative Commons license.