Skip to main content
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 28 guides that include this step.

Step Type:

Drag to rearrange

The lower case is constructed of rubber-coated aluminum. Do not excessively bend the aluminum during removal, as any permanent deformation will cause tolerance issues after reassembly.

Slightly lift the lower case near the vent opening.

Continue running your fingers between the lower and upper cases until the upper case pops off its retaining clips.

The location of these three clips is shown in the third picture.

Your contributions are licensed under the open source Creative Commons license.