Skip to main content
Help
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Carefully wedge the tip of a spudger underneath the home button connector cable.

Gently move the spudger across to separate the home button connector cable from the adhesive securing it to the front panel assembly.

If the cable doesn't separate easily, apply heat using an iOpener or hair dryer to soften the adhesive, and try again. Be careful not to damage the cable.

Your contributions are licensed under the open source Creative Commons license.